WYBOT C2 Vision Cordless Robotic Pool Cleaner (2026 New) review

Exact identity: a Vision cleaner, not a finish of the C2

This is a document-based assessment, not a hands-on test. WYBOT's current U.S. page identifies the (2026 New) C2 Vision as model C2V. It lists Black WYUS-C2V-KG1, Gray WYUS-C2V-AG1 and White WYUS-C2V-WG1 under one feature set, with no functional finish difference stated. The image is the exact Black SKU render, not proof of package contents or performance.

What the camera adds—and what it does not

The useful distinction is a selectable Dirt Hunting or Vision routine. In the shared C2/C2 Vision manual, this mode is expressly C2 Vision-only and cleans the floor only: an underwater front camera detects debris ahead, then the robot takes a targeted floor path. That is not a replacement for the separate full-pool, wall-only, waterline-only or wall-then-floor modes. Buyers seeking wall or waterline cleaning still need to plan around those standard settings. Nor does a targeting feature prove that the robot reaches all debris in a single pass.

WYBOT's page claims 20-times-faster performance in Vision mode, but the materials reviewed do not give a comparison protocol or a pool-specific result. The manual says the camera may turn on and record floor-dirt types during cleaning, and that the robot's recognition is expected to improve after about a month of use. It also instructs users to remove a protective film before Dirt Hunting, keep the lens clear of dust and scratches, and keep firmware current. This makes Vision a feature with setup and upkeep, not simply a more powerful version of every ordinary cleaning mode. The manual does not explain where any recorded information is stored or how it is shared; consult WYBOT's current privacy and app materials if that matters to you.

More modes, but pay attention to how they are counted

The exact feature list names eight choices: Vision, full pool, floor, wall, waterline, wall-then-floor, Turbo and Eco. The shared manual lists seven C2 modes plus Vision. A comparison table says “4(vision) + 7 modes,” an ambiguous count; this review does not claim eleven programs.

The headline routine includes floor, walls and waterline, while Turbo, Eco and Vision are floor-focused settings. The manual mentions steps, drains and shallow water but gives no minimum depth; a 13-inch-qualified ledge is unproven. C2 Vision is not a floating-debris surface skimmer.

App setup is a between-runs job

WYBOT lists app control, scheduling and OTA updates. The shared manual says to pair and choose a mode out of the pool because Bluetooth will not pass through water. That supports setup between runs, not underwater steering. The download material lists iOS 15 or later and Android 8.0 or later. The manual also calls for a full initial charge, dry charging port and charging about three metres from the pool edge; it warns against operating the cleaner while the pool filter is running.

Included fine filtration comes with a mode restriction

The current page describes 180-micron and 10-micron filtration. The shared manual identifies an auxiliary ultra-fine element and shows two filters in its packing list, which supports an included fine filter—not a spare refill kit. Its instructions recommend that element only for Turbo Floor mode and advise against installing it when the floor is heavily soiled because flow or operation may be affected. The ordinary filter basket must still be cleaned after use. If your main need is wall or waterline work, the fact that a finer element is in the box should not be mistaken for permission to use it in every mode.

Pool fit and source conflicts

WYBOT promotes the model for above- and in-ground pools and several finishes. Its manual FAQ specifically discusses in-ground rectangles, ovals and irregular shapes, and warns that slippery tile, mosaic and acrylic may not work well without modification. Ask about the exact pool surface, slopes, drains, steps and liner rather than relying on a broad material list.

The exact page says up to 2,152 square feet; the shared manual instead lists 150–180 square metres for C2 Vision. Those figures do not agree. The page also lists a 13-foot maximum water depth, while the manual's device table labels a 9.8-foot (3-metre) figure as minimum depth and separately advises at least 19.5 inches (50 cm) of water above the unit for optimal cleaning. This review keeps those inconsistencies visible rather than picking one value. No source gives a maximum pool length in feet, and an area rating cannot be converted to one.

The product page's feature copy lists 3,883 gallons per hour, but its comparison table shows 3,592. Runtime is advertised as up to 180 minutes in Eco mode; the shared manual describes three hours in Eco Floor. These are manufacturer figures, not independently measured pool results.

Recall and warranty check

The current U.S. page advertises a two-year warranty; check the written terms and exact seller. CPSC Recall 26-372 names Osprey 700 Max model numbers WY3312MAX/WY100MAX and S1 model WY200 within specified serial ranges. “WYBOT C2” appears in the notice as the replacement remedy, not in the affected model-number table. The listed C2 Vision retail codes are not those recalled codes, but always compare the label and serial against the complete current notice. This narrow code check is not a blanket safety clearance.

Bottom line

The C2 Vision makes the clearest case when you value its distinct camera-led, floor-only targeting mode and are comfortable maintaining that lens and setting the robot up outside the pool. It should not be chosen on the assumption that its Vision routine also scrubs walls or the waterline, or that the maker's speed claim is a verified outcome. Compared with the 2026 C2, it adds a real function and extra path, but the key area, depth, mode-count and suction details still need careful reading. Review the exact U.S. product page, shared C2/C2 Vision manual and CPSC Recall 26-372 notice for current terms and exact model/serial checks.