Model assessment · Dolphin

Dolphin Nautilus AG review

A listed above-ground pool cleaner with floor-only coverage, top-access fine filtration, a 1.5-hour default cycle and no app; its formal 30 ft rating conflicts with promotional 33 ft wording.

Sources checked 2026-10-28 · Our editorial approach

Review the exact model, limitations and buying checks on BuyerShortlists before choosing a seller. We may earn from qualifying purchases.

Official product image of the Dolphin Nautilus AG pool cleaner, with the NAUTILUS AG marking visible.
Official manufacturer image · Nautilus AG Maytronics
A useful fit for

A candidate for an above-ground pool within the formal 30 ft field when floor-only cleaning, top-access fine filtration and a simple manual cycle are acceptable; the product page separately advertises up to 33 ft, which should be clarified before relying on that larger figure.

The main tradeoff

This is a floor-only model: wall and waterline cleaning, a mobile app, weekly timer and delayed start are not documented. The page conflicts on 30 versus 33 ft, and the linked manual portal currently has no product match, leaving setup and pool-condition limits unresolved.

Your needs, this model

Does it fit your priorities?

Does the Dolphin Nautilus AG have a 30-foot or 33-foot pool rating?

The exact page is inconsistent. Its promotional copy says the Nautilus AG cleans above-ground and small in-ground pool floors up to 33 ft, but its formal Maximum Pool Length field and its comparison table both say 30 ft. This assessment uses 30 ft as the conservative matching limit. Ask Maytronics to clarify before relying on a pool length above 30 ft.

Explore this need in the finder →
Will the Nautilus AG clean pool walls or the waterline?

Those capabilities are not established for this exact configuration. The product page lists Floor as its coverage and Waterline Scrubbing No; its main feature copy also describes floor cleaning. If wall or waterline cleaning is essential, compare an exact model whose own operating plan lists those areas rather than inferring them from the Nautilus name.

Explore this need in the finder →
Does it provide app scheduling or an included ultra-fine filter?

Maytronics lists no mobile application, no weekly timer, no delay feature and a Fine Filter Kit. Its comparison row shows no additional filter in the box. The linked manual portal currently returns no product match, so confirm the current manual and exact seller package if a particular filtration stage or setup routine matters.

Explore this need in the finder →

This is a document-based assessment, not a hands-on test. The Dolphin Nautilus AG (Product No. 99996132-PC) is presented as a compact cleaner for above-ground pools and smaller in-ground pools, but its exact U.S. page makes one important specification harder to interpret than the headline suggests: promotional copy says “up to 33 ft,” while both the formal maximum-pool-length field and the page’s comparison table say 30 ft. For matching, I use the more conservative 30-foot value and would ask Maytronics to clarify the intended rating before relying on the extra three feet.

What the published coverage does—and does not—say

The detailed fields describe floor cleaning only. The product page explicitly shows “Waterline Scrubbing: No,” while the main feature list says it vacuums and scrubs pool floors. That is a narrow, intelligible role: choose it only if the floor is the job you need covered. It is not a documented choice for wall or waterline cleaning, and the page gives no special stair or sun-shelf mode.

Maytronics markets the robot for above-ground and small in-ground pool floors. Yet the structured pool-classification field identifies only “Above Ground.” I would not extend the formal fit record to in-ground pools without getting clarification about the exact basin and cleaner configuration. The listed shapes are rectangular, round, free-form and kidney; the source does not establish every floor slope, ladder, transition or surface as compatible.

Simple cycle, manual operation

The product attributes list a 1.5-hour default cycle, with no delay feature, weekly timer, enhanced cycle or mobile application. That suggests a straightforward drop-in cleaning routine rather than remote scheduling or app-selected coverage. The product page also lists no remote control and a standard active brush. These are published feature fields, not observed results: the sources do not show how completely the robot handles a particular pool’s debris, floor texture or shape.

The manufacturer’s exact listing calls it a plug-in cleaner indirectly through its non-cordless product classification; the product image also depicts a tether. The manual portal linked for this product number currently returns a “no products were found” message, so I cannot use a model-specific manual here to settle installation, cable handling, water limits or maintenance details. Confirm the current instructions and power-supply package before setup rather than borrowing directions from a similarly named Nautilus model.

Top-access fine filtration is the clearest ownership feature

Maytronics specifies a top-access fine-filter kit, which is a practical detail for routine removal: the basket can be reached from above instead of requiring access underneath the cleaner. The page does not give a micron rating, so “fine” should not be translated into a particular particle-capture promise. Its comparison table shows no additional filter in the box. Check the exact 99996132-PC package and ask whether another compatible filter is sold separately if you want a different filtration stage.

The page lists a unit weight of 14.619 lb and a one-year warranty. Its dimensions and shape data may help with lifting and storage planning, but there is no supported claim here about observed pickup effort, durability or long-term repair cost. Maytronics reports 4,000 gallons per hour as a suction-rate specification; that is a manufacturer figure, not an independent measurement or a substitute for the missing pool-specific performance evidence.

How it differs from nearby corded options

Maytronics’ own comparison puts the Nautilus AG alongside the Nautilus CC and Nautilus Pool Up. In that table, the AG is the only floor-only choice; the CC and Pool Up list both floor and walls. The table gives the AG a 30-foot limit and a 1.5-hour cycle, versus 33 feet and two hours for the CC, while the Pool Up’s cycle value is not supplied there. The AG and CC list fine-filter kits, whereas Pool Up lists a filter bag. This is more useful than assuming that three Nautilus names indicate the same cleaning plan.

Who should consider it?

Keep the Nautilus AG in view if you want a basic, floor-only robot for a pool within a 30-foot formal rating, prefer top-access fine filtration, and do not need an app, a weekly timer, wall or waterline scrubbing. Its light listed weight may also matter when a cleaner must be lifted out between cycles, though actual handling varies and has not been tested here.

Pause if your pool is longer than 30 feet, if the three-foot discrepancy affects your decision, or if wall, waterline, step or shallow-feature coverage is essential. Before buying, verify the complete model number, current manual, exact power supply and cable arrangement, pool type and surface compatibility, included filter parts, warranty terms and the seller’s precise package. This assessment follows Maytronics’ current published record; it does not claim personal use, measured cleaning performance or customer experience.

Key specifications

Key details at a glance

Power sourceCorded / plug-in
Manufacturer-stated pool length limit30 ft
Documented coverage capabilityPool floor
Pool construction types listedAbove-ground pool
Manufacturer filter labelFine filter kit
Filter accessTop access
Ultra-fine filter kit listed in boxNo
Default cycle shown1.5 hours
Robot weight shown14.62 lb
Warranty shown on manufacturer page1 years

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this review

Sources for this assessment

Use the finder as a starting point

Choose your pool type, required cleaning areas, power routine and filter needs, then check each exact model's limits and instructions.

In this review

Questions to consider for this model

Read the matching requirement, its tradeoffs and the other reviewed options.

More matching requirements
Combine my requirements →